Jiangsu Qianyuanfeida electric equipment Co.,Ltd
江苏乾元飞达电气设备有限公司
Add to Cart
Pipe Fitting Fabric Expansion Joint/Fiber Compensator
Product description
Silicon Coated Glass Fabric PTFE Foil Glass Wool Ceramic Wool Blanket Glass Wooven Fabric Hi-Silica Fabric Elastomer Coated Nylon Fabric Rock / Mineral Wool PVC Cloth Canvas Aluminized Hi-Silica Compressed Glass Felt Neoprene Viton Ceramic Lump SS Wire Mesh Heat Treated Glass Fabric Virgin PTFE etc.
Advantages
» reasonable structure,good elasticity,large range of compensation pipeline and little counterforce to the brackets of pipeline.
» shock absorption and noise decrese, heat and dust insulation
» the displacement can be deflected to prevent damage caused by subsidence of connected brackets and equipment base.
» it is convenience to installation and maintenance
» good resistance to milling, heat, aging and corrosion
» little resistance and little weight, each performance is better than the compensation device of other materials
Pipe Fitting Rectangular Fabric Compensator
| Technical performance | FVB | FUB |
| Compensation Length | ±100mm | ±90mm |
| Working pressure | ≤4500pa | ≤4500pa |
| Temperature range | -40℃-300 ℃ | -40 ℃-300 ℃ |
| Installation length | 300-450mm | 300-450mm |
| Variation rate of extension | ≤15% | ≤15% |
| Distance between fixed brackets on the both ends | ≤15% | |
| Distance between flexible brackets on the both ends | 2-4m | |
| Tensile strength | ≥12Mpa | ≥12Mpa |
| Elongation at failure | ≥300% | ≥300% |
| Permanent sat at break | ≤25% | ≤25% |
| Rigidity | 58±3° | 58±3° |
| Aging in the heated air | 72°C×72h | 72°C×72h |