Jiangsu Qianyuanfeida electric equipment Co.,Ltd
江苏乾元飞达电气设备有限公司
Add to Cart
Angle hinge expansion joints Universal hinge expansion joints
Product description
The compound hinge type expansion joint (FJ) is composed of two bellows and pins connected to the middle pipe, hinge plates and vertical plates, and can only absorb lateral displacement in a plane and can withstand the pressure and thrust of the bellows.Expansion joint.
Parameters
| No. | Model | Amount of axial compensation | Axial stiffness | Connection Size | Maximum radial dimension | Length | Pressure rating range(Mpa) |
| 1 | HDDL100-J | 100-350 | 4-0.6 | 108*4 | 250*250 | 1200-3000 | 0.25-6.0 |
| 2 | HDDL150-J | 100-350 | 12-2 | 159*4.5 | 300*300 | 1200-3000 | 0.25-6.0 |
| 3 | HDDL200-J | 100-350 | 32-6 | 219*6 | 360*360 | 1200-3000 | 0.25-6.0 |
| 4 | HDDL250-J | 100-350 | 33-8 | 273*8 | 420*420 | 1200-3000 | 0.25-6.0 |
| 5 | HDDL300-J | 109-320 | 28-10 | 325*8 | 480*480 | 1500-3000 | 0.25-6.0 |
| 6 | HDDL350-J | 100-300 | 56-13 | 377*8 | 580*580 | 1500-3000 | 0.25-6.0 |
| 7 | HDDL400-J | 90-280 | 130-17 | 426*10 | 630*630 | 1500-3000 | 0.25-4.0 |
| 8 | HDDL500-J | 80-260 | 160-41 | 529*10 | 750*750 | 1500-3000 | 0.25-4.0 |
| 9 | HDDL600-J | 100-250 | 127-27 | 630*10 | 880*880 | 2000-3500 | 0.25-4.0 |
| 10 | HDDL700-J | 100-220 | 280-57 | 720*12 | 950*950 | 2000-3500 | 0.25-2.5 |
| 11 | HDDL800-J | 80-180 | 402-79 | 820*12 | 1080*1080 | 2000-3500 | 0.25-2.5 |
| 12 | HDDL900-J | 120-250 | 369-98 | 920*12 | 1180*1180 | 2500-4000 | 0.25-2.5 |
| 13 | HDDL1000-J | 108-240 | 416-106 | 1020*12 | 1310*1310 | 2500-4000 | 0.25-2.5 |
Product features
The expansion joint consists of a pipe, a bellows and a pair of chains connected to the pipe. It can only absorb the angular displacement of a single plane. Two or three angular compensators should be used together when absorbing displacement. At the same time according to the chain with internal pressure thrust capacity.
Precautions for installation and use
1. The small tie rod on the expansion joint is used for installation, transportation and adjustment and cannot be used as a bearing part. After the product is installed on the pipeline, it must be removed before it can be put into operation.
2. When the expansion joint Angle deformation is required to be large or the system pressure is high, the product is recommended to be "cold tight" during installation, generally 50% or 100% cold tight. The main advantage of cold tight lies in improving the stability of expansion joint and pipeline.
3. Pay attention to the rotational plane of expansion joint hinge during installation, which must be consistent with the displacement plane.